Stainless Alloy and Titanium Wheel Nuts & Studs

 

- Race track-proven, durable and high strength

- Fully optimized engineering design results in feather lightweight

- Available for all stud patterns, bolt circles, and different thread sizes

- Available in Titanium and Heat Treated Stainless Alloy Steel

- Bolt to stud conversion for fast wheel changing, offset spacer adjustments

State Of The Art Engineering

 

All PPE wheel nuts are CNC machined in original colors which allow you to see the state of the art of our machining skill. CNC machined threads are perfectly cut with smooth thread matching which ensures all tightening torque converts to clamping force to the maximum.

Wheel Seat Protection

Each wheel nut is in composite constructions with multiple types of material. With our special hard anodized floating seats (collar), you can be sure every fitment will be at the center of the nut seat without damaging the wheel nut at the same time.

M12 Taper. M14 Taper, R12, R13, R14 Ball Seats all available

Super High Strength And Stiffness

 

By using proprietary composition stainless alloy steel with special hardening and tempering formulae, PPE creates one of the strongest and lightest wheel nut on earth. Our stainless alloy wheel nut is made by super high strength material, and it is also one of the lightest in the current market. PPE wheel nuts allow continuous usage under the most extreme high-temperature environment without deformation.

State Of The Art CNC Machining Skill

All PPE wheel nuts are CNC machined in original colors which allow you to see the state of the art of our machining skill. CNC machined threads are perfectly cut with smooth thread matching which ensures all tightening torque converts to clamping force to the maximum.

Detachable Waterproof End Caps

 

Free for users' choice of through-hole lug nuts for long studs, or capped wheel nuts waterproof setup for road use. One design works for both. Choice of colored caps and custom engraved end caps available.

Fully Optimized Design, Feather Lightweight

With our engineering skill into all details, we are able to create this high strength wheel nuts with just half the weight of conventional steel wheel nuts. PPE wheel nuts not only look good but also reduce unsprung weight. Each Titanium wheel nut weighs less than 20 grams each. Conventional long wheel nuts weigh more than 60 grams, PPE Titanium wheel nuts

By using aerospace-grade titanium alloy forming one of the strongest and lightest wheel nut on earth. Our titanium alloy floating wheel nuts are designed to be lifetime durable and allow continuous usage under the most extreme high-temperature environment without deformation and rustproof. Titanium is the metal known as the highest strength to weight ratio on earth.

All-wheel nuts components are machined to close tolerance for perfect fitments and wheel nut seat mating, ensure no loose fits scenario occurs.

Wheel Studs Conversion Kit

 

PPE wheel studs conversion kit converts different wheel bolt types to wheel nut types installation. This makes much faster wheel change and strength improvements against bolt setups. Extended studs conversion allows the usage of spacers with the flexibility of offset adjustments which most racers needed. Our stud material is made by ultra-lightweight high strength aerospace grade titanium alloy, which achieves a yield strength of over 1000MPa.

Related Article

See Installation Cases

Check and see how people successfully convert their bolts to studs for easy wheels fitting

Related Products
Super Light weight wheels

Super light weight custom forged wheels, just a click away

Related Products
Stiffen up your brakes now!

Reduced brake pedal travel, firmer brakes, more durable and reliable

Light Weight Hollow Section And Ventilated Design

 

High strength alloy or titanium with advanced engineering skills allow all studs sections hollow with side hole ventilation. Enabling hot air to be expelled from inside the hub through hollow sections which also provide extra weight saving constructions.

Typical weight of an M12x1.5 stud (fits old BMW/Mercedes/Renault) is less than 18 grams, M14 stud (fits new BMW/Mercedes/Audi/Porsche) roughly at 24 grams

Extended Lengths

Studs come with two lengths, standard length, and extended length. The standard length has an extended length of +5mm comparing to OEM bolt lengths, allow the addition of 5mm spacers, extended allow a maximum of 20mm of spacers added between the wheel and wheel hub.

Wide Range of Application​

With modern German cars using different radius ball seats, Japanese M12, newer BMW using M14x1.25 stud patterns, or old Mercedes and BMW M12x1.5 studs, or whether your Aston Martin M14x2.0 wheel nuts, we have everything you need in both Titanium and Stainless Alloy Steels.

Supported Vehicles

Acufa

Alfa Romeo

Aston Martin

Audi

Bentley

BMW

Buick

Cadilac

Chevrolet

Chrysler

Daihatsu

Dodge

Ferrari

Fiat

Ford

General Motors

Honda

Hyundai

Jeep

KIA

Lamborghini

Lancia

Land Rover

Lexus

Lincoln

Mini

Mercedes Benz

Mini

Mercedes Benz

Nissan

Pagani

Renault

Tesla

Toyota

Volkswagon

Volvo

*There are too many automotive manufacturerers thats not listed with compatible products. If your vehicle is not on the above list please contact us directly for support information.

By continue using this website as a "Service", you are agreed and aware of the Legal notice and disclaimer of this website. 
Copyright © 2017 ProPioneer Engineering (HK) Co., Ltd. All rights reserved.

  • Wix Facebook page
  • Instagram Social Icon